Iso ts 16949 version 2016 pdf
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,
• IATF 16949:2016 follows the high level structure of ISO 9001:2015 • IATF 16949:2016 must be used in conjunction with ISO 9001:2015 2 separate documents must be used to have all requirements IATF 16949 cannot be used as a stand-alone requirements document • 282 shalls / 16 shoulds in IATF 16949 (292 shalls / 16 shoulds in ISO/TS 16949) • IATF created a transition plan and communicated
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.

MANAGEMENT SYSTEM CERTIFICATE fras-le.com
– combinatorial optimization cook solution manual

hOw TO SuCCESSFully TrANSITION TO ISO/TS 169492016?

ISO/TS 90022016 – Quality Management Systems-Guidelines

ISO/TS 169492016 Bureau Veritas Thailand

transitioning-to-iatf-16949-whitepaper_aiag-3.pdf

Awareness Session for Transition to IATF 169492016

CERTIFICATE OF REGISTRATION Global Forming

IATF 16949 readiness version 2016 pqbweb.eu

https://en.wikipedia.org/wiki/ISO_9000

adobe muse tutorial terry white –

hOw TO SuCCESSFully TrANSITION TO ISO/TS 169492016?
IATF 169492016 Center for Industrial Services

This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,

IATF 16949 2016 Revision Update ISO Registrar – ASR
transitioning-to-iatf-16949-whitepaper_aiag-3.pdf

RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December

ISO/TS 169492016 Bureau Veritas Thailand
Differences between IATF 169492016 vs ISO/TS 169492009

12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,

ISO/TS 169492016 Draft The Quality Forum Online
IATF 16949 readiness version 2016 pqbweb.eu

This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
• IATF 16949:2016 follows the high level structure of ISO 9001:2015 • IATF 16949:2016 must be used in conjunction with ISO 9001:2015 2 separate documents must be used to have all requirements IATF 16949 cannot be used as a stand-alone requirements document • 282 shalls / 16 shoulds in IATF 16949 (292 shalls / 16 shoulds in ISO/TS 16949) • IATF created a transition plan and communicated

Awareness Session for Transition to IATF 169492016
General Motors Global Supplier Quality

IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
• IATF 16949:2016 follows the high level structure of ISO 9001:2015 • IATF 16949:2016 must be used in conjunction with ISO 9001:2015 2 separate documents must be used to have all requirements IATF 16949 cannot be used as a stand-alone requirements document • 282 shalls / 16 shoulds in IATF 16949 (292 shalls / 16 shoulds in ISO/TS 16949) • IATF created a transition plan and communicated
ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for

Awareness Session for Transition to IATF 169492016
General Motors Global Supplier Quality

ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.
3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
• IATF 16949:2016 follows the high level structure of ISO 9001:2015 • IATF 16949:2016 must be used in conjunction with ISO 9001:2015 2 separate documents must be used to have all requirements IATF 16949 cannot be used as a stand-alone requirements document • 282 shalls / 16 shoulds in IATF 16949 (292 shalls / 16 shoulds in ISO/TS 16949) • IATF created a transition plan and communicated
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.

ISO/TS 16949 Transition NSF International
hOw TO SuCCESSFully TrANSITION TO ISO/TS 169492016?

This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
• IATF 16949:2016 follows the high level structure of ISO 9001:2015 • IATF 16949:2016 must be used in conjunction with ISO 9001:2015 2 separate documents must be used to have all requirements IATF 16949 cannot be used as a stand-alone requirements document • 282 shalls / 16 shoulds in IATF 16949 (292 shalls / 16 shoulds in ISO/TS 16949) • IATF created a transition plan and communicated
ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,

ISO/TS 90022016 – Quality Management Systems-Guidelines
transitioning-to-iatf-16949-whitepaper_aiag-3.pdf

ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version

Awareness Session for Transition to IATF 169492016
Differences between IATF 169492016 vs ISO/TS 169492009

ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version

IATF 16949 2016 1st edition – SMMT
IATF 16949 2016 Revision Update ISO Registrar – ASR

18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
• IATF 16949:2016 follows the high level structure of ISO 9001:2015 • IATF 16949:2016 must be used in conjunction with ISO 9001:2015 2 separate documents must be used to have all requirements IATF 16949 cannot be used as a stand-alone requirements document • 282 shalls / 16 shoulds in IATF 16949 (292 shalls / 16 shoulds in ISO/TS 16949) • IATF created a transition plan and communicated
ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.

IATF 16949 2016 1st edition – SMMT
ISO/TS 169492016 Draft The Quality Forum Online

12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.

Awareness Session for Transition to IATF 169492016
IATF 169492016 Center for Industrial Services

The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …

Awareness Session for Transition to IATF 169492016
ISO/TS 169492016 Bureau Veritas Thailand

ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
ISO/TS 16949, one of the automotive industry’s most widely used international standards for quality management, was first developed in 1999 by the International Automotive Task Force (IATF) in conjunction with ISO’s technical committee for quality management, ISO/TC 176.
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December

ISO/TS 16949 Transition NSF International
ISO/TS 169492016 Bureau Veritas Thailand

The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.

ISO/TS 90022016 – Quality Management Systems-Guidelines
Revision of the ISO/TS 16949 Standard NQA

ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …

ISO/TS 169492016 Draft The Quality Forum Online
ISO/TS 16949 Transition NSF International

RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!

Differences between IATF 169492016 vs ISO/TS 169492009
IATF 16949 2016 1st edition – SMMT

3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
ISO/TS 16949:2009 into IATF 16949:2016 QMS Transition/Instructions checklist 1 This instruction / checklist is intended for use in upgrading your Quality Management System for the transition from the ISO/TS 16949:2009 version to the IATF 16949:2016 revision for Quality management systems used in the automotive production and service parts industries. The above Quality Management Systems are
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
18/01/2017 · In ISO 16949 there was a reference and a Sanctioned Interpretation (No 1) regarding Small businesses – those too small to be able to or willing to get ISO9001 accreditation. 8.4.2.3 now states that the organisation Shall require their suppliers to develop, implement etc.. unless authorized by …
ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
ISO/TS 16949:2009, Second Edition, June 15, 2009, “Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
12/05/2016 · Re: Any Insight to 2016 Version of TS16949 Rumor has it the new standards were “tested” with the cooperation of some Tier 1 suppliers. That process involved a questionnaire/checklist completed by the Tier 1 prior to the audit.
IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version

ISO/TS 169492016 Bureau Veritas Thailand
ISO/TS 16949 Transition NSF International

IATF 16949:2016 Edition 1 For the following activities Design and manufacturing of surface solutions for precision components through surface preparation and application of thin-film, wear-resistant coatings. EXCLUSIONS: None 3 Year certification is valid from 09 October 2018 until 08 October 2021 and remains valid subject to satisfactory surveillance audits Version no. 3 Current version
3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.
ในประเทศไทยมีบริษัทที่ขอการรับรอง TS 16949:2009 ประมาณ 1,500 บริษัท ซึ่งจำเป็นต้องวางแผนในการเปลี่ยน Version เป็น iatf 16949 ภายใน 2 ปีค่ะ ( ก่อน 14 กันยายน 2018 ) โดยขณะนี้
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
ISO/TS 9002:2016 provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements.
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
IATF 16949 is aligned with and refers to the most recent version of ISO’s quality management systems standard, ISO 9001:2015, fully respecting its structure and requirements. IATF 16949 is not a standalone quality management standard, but is implemented as a supplement to, and in conjunction with, ISO …

CERTIFICATE OF REGISTRATION Global Forming
hOw TO SuCCESSFully TrANSITION TO ISO/TS 169492016?

3/03/2016 · Hello, I am the ISO coordinator at a relatively new automotive supplier, and we have been charged with becoming TS certified by March 2017. With the new revision of the standard set to be released in December, and with 2009 certification set to expire in September 2018, we are hoping to just be initially certified to the 2016 revision.
ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/ development,
ISO/TS 16949:2009 – THIRD EDITION The manufacture of roll forming, stampings and assemblies. Exclusion Design. Global Forming LLC 913 Bates Street, Indianapolis, Indiana 46202 USA
The current ISO/TS 16949 Technical Specification is auditable until 30 September 2017. Organizations currently certified to the previous version and still current ISO9001:2008 have a maximum (3) years to transition to the new version ISO9001:2015 i.e. 15th September 2018.
This version will eventually fully replace ISO/TS 16949:2009, with the transition period ending on 14 September 2018. The IATF is also aiming to release the revised scheme rules that support the certification process, from the current 4th Edition, to the 5th Edition rules in December 2016. This will include all the Sanctioned Interpretations since the 4th edition rules were issued in December
RS122 KM66, Nº10945, Caxias do Sul, RS – 95115-550, Brazil and, if applicable, the remote support locations as mentioned in the Appendix accompanying this Certificate
• IATF 16949:2016 follows the high level structure of ISO 9001:2015 • IATF 16949:2016 must be used in conjunction with ISO 9001:2015 2 separate documents must be used to have all requirements IATF 16949 cannot be used as a stand-alone requirements document • 282 shalls / 16 shoulds in IATF 16949 (292 shalls / 16 shoulds in ISO/TS 16949) • IATF created a transition plan and communicated
การตีความข้อกำหนด iso/ts 16949:2016 เพื่อให้เข้าใจข้อกำหนดของ ISO/TS16949:2016 – 3rd Edition และทราบถึงการประยุกต์ใช้ข้อกำหนดให้เกิดประสิทธิผลของระบบคุณภาพ Read more
IATF 16949:2016. TRANSITION INFORMATION auditors. ISO/TS 16949 was developed in 1999 by the IATF in conjunction with the ISO quality management technical committee ISO/TC 176. manufacturing.
ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements for the design/development, manufacturing,
The IATF will be releasing a transition strategy from ISO/TS 16949:2009 to a new version of the ISO/TS 16949 standard at a later date. Completion of the revised quality management system standard is targeted for Q4 2016.
E-Learning (online course) – Implementation, maintenance, certification and improvement of your automotive quality management system IATF 16949 version 2016 – You save 42 euros on the documents provided!